WEBVTT 00:00:08.480 --> 00:00:10.080 Hi and welcome to this short introduction 00:00:10.100 --> 00:00:12.635 To the most important partition actions 00:00:12.640 --> 00:00:14.280 Of MES Model and Refactor. 00:00:15.120 --> 00:00:17.400 With these actions you can quickly and easily 00:00:17.462 --> 00:00:19.320 Improve the structure of your model. 00:00:21.000 --> 00:00:22.920 First I want to show you the actions: 00:00:23.030 --> 00:00:26.130 Move Blocks Down / Up. 00:00:26.480 --> 00:00:29.560 These actions can be used to move connected blocks 00:00:29.750 --> 00:00:31.920 Into or out of subsystems. 00:00:35.520 --> 00:00:37.720 Imagine you're working on this subsystem 00:00:38.320 --> 00:00:41.230 And decide to move these pre-processing blocks 00:00:43.520 --> 00:00:47.520 Down one level, into this subsystem. 00:00:48.000 --> 00:00:49.725 If you want to do this manually 00:00:49.725 --> 00:00:53.545 Reconnecting the blocks is very time consuming 00:00:53.600 --> 00:00:56.879 And also error prone. 00:00:57.360 --> 00:00:58.960 With MES MoRe you can simply 00:00:58.965 --> 00:01:00.560 Select the blocks you want to move 00:01:01.199 --> 00:01:03.540 Then start the action Move Blocks Down 00:01:03.840 --> 00:01:04.920 From the MoRe menu. 00:01:10.080 --> 00:01:12.200 Choose the target subsystem and click OK 00:01:23.360 --> 00:01:25.760 As you can see here MES MoRe has moved 00:01:25.765 --> 00:01:27.920 The selected blocks down one level 00:01:27.920 --> 00:01:30.300 And retains all signal connections for you. 00:01:32.560 --> 00:01:34.979 It also automatically names all the ports 00:01:35.085 --> 00:01:36.744 According to the signal names. 00:01:39.520 --> 00:01:40.860 For the reverse direction: 00:01:41.320 --> 00:01:43.320 Moving blocks up from the subsystem 00:01:43.840 --> 00:01:46.280 Simply select the blocks to be moved 00:01:48.720 --> 00:01:51.115 And then start the Move Blocks Up action 00:01:51.120 --> 00:01:52.480 From the MoRe menu. 00:02:05.040 --> 00:02:06.595 As you can see, MoRe has moved 00:02:06.960 --> 00:02:08.400 All selected blocks up 00:02:08.680 --> 00:02:10.560 Retaining all signal connections 00:02:10.959 --> 00:02:14.000 And automatically named all affected ports. 00:02:18.600 --> 00:02:20.240 In this case you could also simply 00:02:20.245 --> 00:02:22.085 Correct the layout with MES MoRe 00:02:22.150 --> 00:02:23.840 By selecting these blocks 00:02:25.440 --> 00:02:28.840 And using the Adjust Blocks to Destinations action 00:02:29.240 --> 00:02:30.440 from the MoRe menu. 00:02:38.879 --> 00:02:40.800 A second very important use case for this action 00:02:40.805 --> 00:02:43.040 Is refactoring interfaces. 00:02:44.400 --> 00:02:47.440 Imagine you want to change the interface 00:02:47.605 --> 00:02:48.920 Of this subsystem 00:02:49.510 --> 00:02:51.920 So that only the bus goes into the subsystem 00:02:51.980 --> 00:02:53.820 Instead of the individual signals. 00:02:56.160 --> 00:02:58.000 With MoRe you can do this easily 00:02:58.005 --> 00:02:59.440 By selecting the bus selector 00:03:01.500 --> 00:03:03.760 And moving it down into the target subsystem. 00:03:12.400 --> 00:03:14.640 Now we can see that the interface has been changed 00:03:14.910 --> 00:03:17.080 So that only the bus goes into the subsystem 00:03:24.400 --> 00:03:26.000 The next action I want to show you 00:03:26.000 --> 00:03:28.720 Can be used to split a subsystem into two. 00:03:33.760 --> 00:03:35.719 Imagine you're working on this subsystem 00:03:36.270 --> 00:03:38.200 And at some point you realize 00:03:38.319 --> 00:03:40.920 There are two completely independent parts. 00:03:41.280 --> 00:03:42.559 The upper part 00:03:45.599 --> 00:03:47.120 And the lower part. 00:03:50.000 --> 00:03:51.559 To follow the design principle 00:03:51.560 --> 00:03:53.819 Subsystems should have high cohesion 00:03:54.159 --> 00:03:55.780 You want to split the subsystem 00:03:56.000 --> 00:03:58.080 Into two subsystems on the same level. 00:04:00.120 --> 00:04:02.080 To do this, simply select the blocks 00:04:02.210 --> 00:04:03.431 You want to split. 00:04:06.640 --> 00:04:09.340 Then you can start the action Split Subsystem 00:04:09.340 --> 00:04:10.440 From the MoRe menu 00:04:15.519 --> 00:04:18.000 And enter a name for the new subsystem. 00:04:22.160 --> 00:04:23.520 When you click OK 00:04:24.900 --> 00:04:27.920 MoRe creates a subsystem next to the current subsystem 00:04:28.400 --> 00:04:31.360 And moves the selected blocks to this new one 00:04:35.759 --> 00:04:38.440 While preserving all signal connections. 00:04:49.440 --> 00:04:50.960 The next action can be used 00:04:51.150 --> 00:04:53.240 To merge two subsystems into one. 00:04:57.600 --> 00:04:59.720 Imagine you're working on this subsystem 00:04:59.730 --> 00:05:02.560 And you detect that the content of subsystem X 00:05:02.960 --> 00:05:06.200 Is so closely related to that of subsystem Y 00:05:06.400 --> 00:05:09.840 That you want to merge subsystem X into Y 00:05:11.280 --> 00:05:14.000 With MoRe you can simply select the two subsystems 00:05:16.000 --> 00:05:18.539 And start the Merge Subsystems action 00:05:18.579 --> 00:05:19.960 From the MoRe menu. 00:05:25.199 --> 00:05:27.840 Then you choose the target subsystem of the merge. 00:05:31.440 --> 00:05:36.080 When you click OK, MoRe moves the blocks from X to Y 00:05:36.400 --> 00:05:38.120 Then removes subsystem X 00:05:38.420 --> 00:05:40.760 While preserving all signal connections. 00:05:51.440 --> 00:05:53.260 The selected blocks have been moved 00:05:53.360 --> 00:05:56.900 From the previous subsystem X to the current subsystem Y. 00:05:59.110 --> 00:06:01.311 The next action creates a subsystem 00:06:01.400 --> 00:06:02.760 From the selected blocks. 00:06:05.360 --> 00:06:08.280 The action is similar to Simulink's built-in function 00:06:08.880 --> 00:06:12.120 But is more intelligent in naming the generated ports. 00:06:22.880 --> 00:06:24.900 The action automatically names the ports 00:06:24.900 --> 00:06:26.680 According to connected signals 00:06:27.680 --> 00:06:30.640 But especially connected ports 00:06:32.240 --> 00:06:33.600 Which saves you a lot of time 00:06:33.800 --> 00:06:35.760 When working on larger subsystems.